Deep groove ball bearing 6030-2RS1 150x225x35 mm
Ball bearings of the extra-light 60 series can still support radial loads despite their low weight. Compared to deep groove ball bearings of the 63 medium series they require a smaller installation space at the same inside diameter, only weigh half of them and allow higher speeds.
| d | 150 mm | Bore diameter |
| D | 225 mm | Outside diameter |
| B | 35 mm | Width |
| d1 | 174 mm | Shoulder diameter inner ring |
| D2 | 206 mm | Recess diameter outer ring |
| r | 2.1 mm | Chamfer dimension |
| Cr | 125 kN | Basic dynamic load rating |
| C0r | 125 kN | Basic static load rating |
| 1700 r/min | Limiting speed |
| ≈m | 4.35 kg | Weight |
| None | Locating feature outer ring | |
| Bearing steel | Material of race | |
| Sheet steel | Cage | |
| Contact seal | Closures | |
| CN | Radial clearance | |
| P0 | Tolerance |
| SKF | FAG | NSK | NTN | NACHI | TIMKEN |
| 6030-2RS1 | 6030-2RSR | 6030DDU | 6030LLU |
