Thin section bearings of the 69 series have considerably smaller dimensions than deep groove ball bearings of the 60, 62, 63 and 64 series with their thin, square cross section at the same inside diameter. Relatively high shaft- and axis diameters can thereby be installed at an also extremely confined installation space. They are extremely light and are suitable for comparatively high speeds. Used extensively in machine tools, textile machinery and jet engine gearbox applications.
| d | 12 mm | Bore diameter |
| D | 24 mm | Outside diameter |
| B | 6 mm | Width |
| d1 | 16 mm | Shoulder diameter inner ring |
| D2 | 21.6 mm | Recess diameter outer ring |
| r | 0.3 mm | Chamfer dimension |
| Cr | 2.9 kN | Basic dynamic load rating |
| C0r | 1.4 kN | Basic static load rating |
| 32000 r/min | Limiting speed |
| ≈m | 0.011 kg | Weight |
| Bearing steel | Material of race | |
| Sheet steel | Cage | |
| Non-contact seal | Closures | |
| CN | Radial clearance | |
| P0 | Tolerance |
| NSK | NTN | NACHI |
| 6901VV | 6901LLB | 6901-2NKE |
