Thin section deep groove ball bearing 61918 2RZ 90x125x18 mm
Thin section bearings of the 69 series have considerably smaller dimensions than deep groove ball bearings of the 60, 62, 63 and 64 series with their thin, square cross section at the same inside diameter. Relatively high shaft- and axis diameters can thereby be installed at an also extremely confined installation space. They are extremely light and are suitable for comparatively high speeds. Used extensively in machine tools, textile machinery and jet engine gearbox applications.
| d | 90 mm | Bore diameter |
| D | 125 mm | Outside diameter |
| B | 18 mm | Width |
| d1 | 101 mm | Shoulder diameter inner ring |
| r | 1.1 mm | Chamfer dimension |
| Cr | 33.2 kN | Basic dynamic load rating |
| C0r | 31.5 kN | Basic static load rating |
| 3200 r/min | Limiting speed |
| ≈m | 0.59 kg | Weight |
| None | Locating feature outer ring | |
| Bearing steel | Material of race | |
| Sheet steel | Cage | |
| Non-contact seal | Closures | |
| CN | Radial clearance | |
| P0 | Tolerance |
| SKF | NSK | NTN |
| 61918-2RZ | 6918VV | 6918LLB |
