Inch cam follower(inch stud type track roller), heavy stud, cylindrical OD, screwdriver slot, sealed, CFH-1/2-S, CRHS-8-1, H-16-L
| D | 12.7 mm | Outside diameter |
| d | 6.35 mm | Stud diameter |
| B | 26.2 mm | Overall width |
| C | 9.525 mm | Outer ring width |
| B1 | 15.875 mm | Length shank on stud |
| C1 | 0.8 mm | Distance face outer ring to face thrust washer |
| d1 | 10.41 mm | Outside diameter flange ring |
| G | 1/4-28 | Thread stud |
| G1 | 6.35 mm | Thread length |
| M | 3.175 mm | Seat diameter for lubrication accessories |
| SW | 3.175 mm | Width across flats |
| r min | 0.4 mm | Chamfer dimension outer ring |
| Fr | 3025 kN | Maximum dynamic radial load |
| F0r | 7028 kN | Maximum static radial load |
| nD G | 11500 r/min | Limiting speed |
| ≈m | 0.02 kg | Weight |
| Cylindrical | Outer ring profile | |
| Full complement roller | Roller guide | |
| Heavy duty,Centric | Stud type | |
| Axial plain washer | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| 1/8” Alemite Fitting | Grease fitting | |
| 1.695 Nm | Recommended tightening torque |
| -30ºC to + 80ºC | Temperature range °C | |
| -22ºF to + 176ºF | Temperature range °F |
| Mc.GILL | Torrington・Koyo・NSK | RBC | IKO | SMITH | Carter |
| CFH-1/2-S | CRHS-8-1 | H-16-L | CRH 8-1 VUU | HR-1/2-X | CNBH-16-S |
