Angular spherical plain bearings to ISO 12240-2, maintenance-free, sliding contact surface: hard chromium/PTFE plastic(fibre reinforced polyamid)
| Requiring maintenance | Maintenance | |
| Hard chromium/PTFE plastic | Sliding contact surface | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 120 mm | Bore diameter |
| D | 180 mm | Outside diameter |
| T | 38 mm | Width |
| B | 37 mm | Width inner ring |
| C | 38 mm | Width outer ring |
| dk | 168 mm | Ball diameter |
| a | 0.5 ° | Tilt angle |
| S | 14.5 mm | Plane surface spacing |
| r1 | 2 mm | Chamfer dimension |
| r2 | 2 mm | Chamfer dimension |
| Cr | 217 kN | Basic dynamic load rating, radial |
| C0r | 348 | Basic static load rating, radial |
| ≈m | 3.97 kg | Weight |
| da max | 134 mm | Connection measure inner ring, max. |
| Da min | 140 mm | Housing connection diameter, min. |
| db max | 155 mm | Connection measure large inner ring side face.max. |
| Db min | 169 mm | Housing connection diameter, small outer ring side face,min |
| dUT | -0.015 mm | Bore diameter,lower tolerance |
| DUT | -0.018 mm | Outside diameter,lower tolerance |
| BUT | -0.3 mm | Inner ring width,lower tolerance |
| CUT | -0.3 mm | Outer ring width, lower tolerance |
| TOT | 0.25 mm | Height,upper tolerance |
| TUT | -0.25 mm | Height, lower, lower tolerance |
| Tmin | -40 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
| SKF | LS |
| GAC120F | GAC120N |
