Angular contact spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, inch series, open design
Angular contact spherical plain bearings are designed to accommodate combined radial and axial loads. Single bearings can accommodate axial loads acting in one direction.
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 63.5 mm | Bore diameter |
| D | 100.013 mm | Outside diameter |
| T | 39.12 mm | Width |
| B | 36.07 mm | Width inner ring |
| C | 29.97 mm | Width outer ring |
| dk | 91.19 mm | Ball diameter |
| a | 5 ° | Tilt angle |
| D1 | 69.85 mm | Inner diameter of housing washer |
| S | 6.86 mm | Plane surface spacing |
| A | 12.7 mm | Distance lubrication bore |
| r1 | 3.6 mm | Chamfer dimension |
| r2 | 3.6 mm | Chamfer dimension |
| Cr | 147.68 kN | Basic dynamic load rating, radial |
| C0r | 592.055 | Basic static load rating, radial |
| Ca | 162.804 kN | Basic dynamic load rating, axial |
| C0a | 650.772 kN | Basic static load rating, axial |
| ≈m | 1.129 kg | Weight |
| da max | 85.6 mm | Connection measure inner ring, max. |
| rb max | 3.6 mm | Fillet radius housing, max. |
| db max | 69.9 mm | Connection measure large inner ring side face.max. |
| ra max | 3.6 mm | Fillet radius shaft, housing,max |
| dUT | -0.0152 mm | Bore diameter,lower tolerance |
| DUT | -0.0203 mm | Outside diameter,lower tolerance |
| BUT | -0.127 mm | Inner ring width,lower tolerance |
| CUT | -0.127 mm | Outer ring width, lower tolerance |
| TUT | -0.635 mm | Height, lower, lower tolerance |
| Tmin | -50 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
| SKF | INA | RBC | AURORA(TIMKEN) | TORRINGTON(TIMKEN) | LS |
| GAZ208SA | GE63ZSX | B40SA | GACZ048S | 25SBT40 | GACZ63S |
