Maintenance-free radial spherical plain bearing to ISO 12 240-1 ( DIN 648 ), dimension series E, sliding contact surface hard chromium/PTFE fabric, with seals
| Maintenance-free | Maintenance | |
| Hard chromium/PTFE composite | Sliding contact surface | |
| Lip seals | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 17 mm | Bore diameter |
| D | 30 mm | Outside diameter |
| B | 14 mm | Width inner ring |
| C | 10 mm | Width outer ring |
| dk | 25 mm | Ball diameter |
| a | 10 ° | Tilt angle |
| d2 | 20.7 mm | Connection measure Inner ring |
| r1 | 0.3 mm | Chamfer dimension |
| r2 | 0.3 mm | Chamfer dimension |
| Cr | 48.7 kN | Basic dynamic load rating, radial |
| C0r | 81.2 kN | Basic static load rating, radial |
| ≈m | 0.037 kg | Weight |
| da min | 19.5 mm | Connection measure inner ring, min. |
| da max | 20.5 mm | Connection measure inner ring, max. |
| Da min | 24.5 mm | Housing connection diameter, min. |
| Da max | 27.5 mm | Housing Shoulder diameter, max. |
| ra min | 0.3 mm | Fillet radius shaft, min |
| rb max | 0.3 mm | Fillet radius housing, max. |
| Max. | 0.04 mm | Radial clearance |
| dUT | -0.008 mm | Bore diameter,lower tolerance |
| DUT | -0.009 mm | Outside diameter,lower tolerance |
| BUT | -0.12 mm | Inner ring width,lower tolerance |
| CUT | -0.24 mm | Outer ring width, lower tolerance |
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 130 °C | Operating temperature max. |
| INA(ELGES) | AURORA(TIMKEN) | IKO | NTN | LS |
| GE17UK-2RS | GE17ET-2RS | GE17EC-2RS | SAR1-17SS | GE17ETL-2RS |
