Maintenance-free radial spherical plain bearing to ISO 12 240-1 ( DIN 648 ), dimension series G, sliding contact surface hard chromium/PTFE composite, carbon steel outer ring pressed around inner ring, with seals
| Maintenance-free | Maintenance | |
| Hard chromium/PTFE composite | Sliding contact surface | |
| Lip seals | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 240 mm | Bore diameter |
| D | 370 mm | Outside diameter |
| B | 190 mm | Width inner ring |
| C | 110 mm | Width outer ring |
| dk | 325 mm | Ball diameter |
| a | 15 ° | Tilt angle |
| d2 | 263.6 mm | Connection measure Inner ring |
| r1 | 1.1 mm | Chamfer dimension |
| r2 | 1.1 mm | Chamfer dimension |
| Cr | 3030 kN | Basic dynamic load rating, radial |
| C0r | 15190 kN | Basic static load rating, radial |
| ≈m | 65.12 kg | Weight |
| da min | 247 mm | Connection measure inner ring, min. |
| da max | 263.6 mm | Connection measure inner ring, max. |
| Da min | 319 mm | Housing connection diameter, min. |
| Da max | 363 mm | Housing Shoulder diameter, max. |
| ra min | 1.1 mm | Fillet radius shaft, min |
| rb max | 1.1 mm | Fillet radius housing, max. |
| Max. | 0.011 mm | Radial clearance |
| dUT | -0.030 mm | Bore diameter,lower tolerance |
| DUT | -0.040 mm | Outside diameter,lower tolerance |
| BUT | -0.35 mm | Inner ring width,lower tolerance |
| CUT | -0.80 mm | Outer ring width, lower tolerance |
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 130 °C | Operating temperature max. |
| INA (ELGES) | TORRINGTON (TIMKEN) | LS |
| GE240FW-2RS | 240FSH370-SS | GEG240XTL-2RS |
