Radial spherical plain bearing, requiring maintenance, steel/steel sliding contact surface, metric sizes, DIN ISO 12240-1, dimension series E
Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. The bearing can be relubricated via lubrication holes and an annular groove in both rings.
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Without | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 90 mm | Bore diameter |
| D | 130 mm | Outside diameter |
| B | 60 mm | Width inner ring |
| C | 50 mm | Width outer ring |
| dk | 115 mm | Ball diameter |
| a | 5 ° | Tilt angle |
| r1 | 1 mm | Chamfer dimension |
| r2 | 1 mm | Chamfer dimension |
| Cr | 490 kN | Basic dynamic load rating, radial |
| C0r | 2450 kN | Basic static load rating, radial |
| ≈m | 2.70 kg | Weight |
| da min | 97.4 mm | Connection measure inner ring, min. |
| da max | 98.1 mm | Connection measure inner ring, max. |
| Da min | 108 mm | Housing connection diameter, min. |
| Da max | 123.5 mm | Housing Shoulder diameter, max. |
| ra min | 1 mm | Fillet radius shaft, min |
| rb max | 1 mm | Fillet radius housing, max. |
| Min. | 0.072 mm | Radial clearance |
| Max. | 0.142 mm | Radial clearance |
| dUT | -0.020 mm | Bore diameter,lower tolerance |
| DUT | -0.018 mm | Outside diameter,lower tolerance |
| BUT | -0.20 mm | Inner ring width,lower tolerance |
| CUT | -0.50 mm | Outer ring width, lower tolerance |
| Tmin | -50 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
| SKF | INA | RBC | AURORA | TORRINGTON | IKO | NTN | LS |
| GE90ES | GE90DO | MB90 | GE90ES | 90FS130 | GE90ES | SA1-90B | GE90ES |
