Inch series radial spherical plain bearings with an extended inner ring, requiring maintenance, steel/steel
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Without | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 63.5 mm | Bore diameter |
| D | 100.013 mm | Outside diameter |
| B | 95.25 mm | Width inner ring |
| C | 47.625 mm | Width outer ring |
| dk | 92 mm | Ball diameter |
| a | 9 ° | Tilt angle |
| d2 | 77.724 mm | Connection measure Inner ring |
| r1 | 1 mm | Chamfer dimension |
| r2 | 1 mm | Chamfer dimension |
| Cr | 355 kN | Basic dynamic load rating, radial |
| C0r | 1060 kN | Basic static load rating, radial |
| ≈m | 2.15 kg | Weight |
| da min | 69.6 mm | Connection measure inner ring, min. |
| da max | 77.7 mm | Connection measure inner ring, max. |
| Da min | 86.6 mm | Housing connection diameter, min. |
| Da max | 94.7 mm | Housing Shoulder diameter, max. |
| ra min | 1 mm | Fillet radius shaft, min |
| rb max | 1 mm | Fillet radius housing, max. |
| Min. | 0.1016 mm | Radial clearance |
| Max. | 0.2032 mm | Radial clearance |
| dUT | -0.0152 mm | Bore diameter,lower tolerance |
| DUT | -0.0203 mm | Outside diameter,lower tolerance |
| BUT | -0.127 mm | Inner ring width,lower tolerance |
| CUT | -0.127 mm | Outer ring width, lower tolerance |
| Tmin | -50 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
| SKF | RBC | AURORA | LS |
| GEZM208ES | B40-EL | GEWZ040ES | GEWZ63ES |
