Inch series radial spherical plain bearings, requiring maintenance, steel/steel, ANSI/ABMA Std. 22.2-1988
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Without | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 120.65 mm | Bore diameter |
| D | 187.325 mm | Outside diameter |
| B | 105.562 mm | Width inner ring |
| C | 90.475 mm | Width outer ring |
| dk | 173.5 mm | Ball diameter |
| a | 6 ° | Tilt angle |
| d2 | 136.8 mm | Connection measure Inner ring |
| r1 | 1 mm | Chamfer dimension |
| r2 | 1 mm | Chamfer dimension |
| Cr | 1250 kN | Basic dynamic load rating, radial |
| C0r | 3750 kN | Basic static load rating, radial |
| ≈m | 11.5 kg | Weight |
| da min | 129 mm | Connection measure inner ring, min. |
| da max | 137.5 mm | Connection measure inner ring, max. |
| Da min | 165 mm | Housing connection diameter, min. |
| Da max | 179 mm | Housing Shoulder diameter, max. |
| ra min | 1 mm | Fillet radius shaft, min |
| rb max | 1 mm | Fillet radius housing, max. |
| Min. | 0.127 mm | Radial clearance |
| Max. | 0.2286 mm | Radial clearance |
| dUT | -0.0203 mm | Bore diameter,lower tolerance |
| DUT | -0.0254 mm | Outside diameter,lower tolerance |
| BUT | -0.127 mm | Inner ring width,lower tolerance |
| CUT | -0.127 mm | Outer ring width, lower tolerance |
| Tmin | -50 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
| RBC | AURORA | TORRINGTON | IKO | NTN | LS |
| B76-9L | GEZ076ES | 45SF76 | SBB76 | SA2-76B | GEZ120ES |
