LHSA10 L-Balls, Zinc alloy ball joints, M10 x 1.25 RH Housing, M10 x 1.25 RH Stud, Sealed
The L-Ball LHSA is a high quality compact rod-end. This rod end is pre-loaded with quality lithium soap based grease, allowing these rods to be run for extended periods of time between re-lubrication. The ball-studs of LHSA 10 and lower are formed as a single solid body, LHSA 12 and higher which are designed for larger loads have the stud friction-welded to a high precision steel ball to give better resistance to wear. The NBR or neoprene rubber dust cover/boot helps resist dirt contamination.
| High-strength zinc alloy | Housing | |
| 1035 steel (20~28HRC) | Shank of Ball stud | |
| Neoprene | Boot |
| G | M10 x 1.25 RH | Housing Thread |
| G1 | M10 x 1.25 RH | Stud thread |
| L | 57 mm | Overall length |
| L1 | 43 mm | Length ball center to housing face |
| L2 | 6.5 mm | Housing wrench flat length |
| L3 | 23 mm | Housing thread length |
| d1 | 10 mm | Shaft diameter |
| d2 | 19 mm | Stud wrench flat diameter |
| d3 | 12 mm | Hexagon diagonal length |
| M | 49 mm | Overall height |
| M1 | 37 mm | Height centerline to stud face |
| M2 | 16 mm | Height centerline to wrench flat face |
| M3 | 17 mm | Stud thread length |
| M4 | 21 mm | Shaft length |
| D1 | 15 mm | Shank diameter, small |
| D3 | 28 mm | Socket outside diameter |
| W | 17 mm | Stud wrench across flat |
| dk | 19.05 mm | Ball diameter |
| 2α° | 38 ° | Permissible tilt angle |
| ≈m | 0.106 kg | Weight |
| CS | 7400 N | Applied static load |
hrome ball joints, chrome plated linkage ends, chrome plated linkages, chromed ball joints, chromed linkage ends, billet linkage, billet rods, chromed billet linkage, chromed billet ends, Juntas Esfericas Cromadas, Rotulas, SAE J490, Kugelgelenke, Kugelgelenk, verchromt
