PI187-3-4, SCS103, MDB-3-4, quick disconnect ball joints, female 10-32 RH housing, 1/4-28 RH stud, light duty
Quick disconnect ball joints are used in light-duty applications where the ball stud needs to be easily disconnected from the housing. This is accomplished simply by pulling the ball stud out of the housing (takes approximately 10 to 20 pounds of force to remove the ball stud). Quick disconnect ball joints are typically assembled to push-pull cables or rod linkages. For heavier loads, consider the QI-series Ball Joints. Plating: plated zinc with a yellow dichromate finish. Metric version and Specials: metric versions, special sizes and configurations are available in volume.
| Carbon steel | Housing material | |
| Carbon steel | Stud material | |
| w/o | Gaiter/Grommet | |
| Right Hand | Thread direction |
| d1 | 10-32 UNF | Housing thread |
| d2 | 1/4-28 UNF | Stud thread |
| a | 22.225 mm | Center to housing face |
| e | 12.29 mm | Housing thread depth |
| H | 29.36 mm | Overall housing length |
| l2 | 14.3 mm | Stud length from shoulder |
| l3 | 11.125 mm | Center to stud shoulder |
| l5 | 3.175 mm | Hex height |
| l6 | 1.6 mm | Blank length |
| d3 | 7.938 mm | Housing shank diameter |
| W | 7.938 mm | Width across flats stud |
| ≈m | 0.014 kg | Weight |
| Cablecraft | Bobcat | Schwing | JI Case CNH New Holland | Thermo King |
| SCS103 | 6644965 | 30330521 | A76747 | 5222A02G01 |
175-403-005, Bobcat 6644965, 08-0022-03, push pull throttle cable linkage end ball joint 10-32 x 1/4-28, RP1542-001, Schwing 30330521, JI Case CNH New Holland A76747 chrome ball joints, chrome plated linkage ends, chrome plated linkages, chromed ball joints, chromed linkage ends, billet linkage, billet rods, chromed billet linkage, chromed billet ends, Juntas Esfericas Cromadas, Rotulas, SAE J490, Kugelgelenke, Kugelgelenk, verchromt
