PI250-4-3, SCS107, MDB-4-3, PI250/1, quick disconnect ball joints, female 1/4-28 RH housing, 10-32 RH stud, light duty
Quick disconnect ball joints are used in light-duty applications where the ball stud needs to be easily disconnected from the housing. This is accomplished simply by pulling the ball stud out of the housing (takes approximately 10 to 20 pounds of force to remove the ball stud). Quick disconnect ball joints are typically assembled to push-pull cables or rod linkages. For heavier loads, consider the QI-series Ball Joints. Plating: plated zinc with a yellow dichromate finish. Metric version and Specials: metric versions, special sizes and configurations are available in volume.
| Carbon steel | Housing material | |
| Carbon steel | Stud material | |
| w/o | Gaiter/Grommet | |
| Right Hand | Thread direction |
| d1 | 1/4-28 UNF | Housing thread |
| d2 | 10-32 UNF | Stud thread |
| a | 24.613 mm | Center to housing face |
| e | 13.487 mm | Housing thread depth |
| H | 31.75 mm | Overall housing length |
| l2 | 11.125 mm | Stud length from shoulder |
| l3 | 11.125 mm | Center to stud shoulder |
| l5 | 3.96 mm | Hex height |
| l6 | 2.388 mm | Blank length |
| d3 | 7.938 mm | Housing shank diameter |
| W | 7.938 mm | Width across flats stud |
| ≈m | 0.014 kg | Weight |
| Cablecraft | Dunlop | John Deere | JI Case CNH New Holland |
| SCS107 | PI250/1 | AT60407 | 8655059 |
John Deere AT60407, JI Case CNH New Holland 86550597 chrome ball joints, chrome plated linkage ends, chrome plated linkages, chromed ball joints, chromed linkage ends, billet linkage, billet rods, chromed billet linkage, chromed billet ends, Juntas Esfericas Cromadas, Rotulas, SAE J490, Kugelgelenke, Kugelgelenk, verchromt
