Rod end, requiring maintenance, female thread, right-hand thread, DIN ISO 12240-4. dimension series K, open design
The rod ends (d≤18mm) contain brass inserts between housing and inner ring spherical surface. The rod ends (d≥20mm) contain a spherical plain bearing with a steel/brass sliding contact surface. Sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. Grease Fittings available zerk type and flush type fitting. The female thread is available with a left-(PHSL) or right-hand thread.
Requiring maintenance | Maintenance | |
Steel/Brass | Sliding contact surface | |
Carbon steel | Material housing | |
Bearing steel | Material ball | |
Brass | Material outer ring | |
Without | Sealing | |
Male | Thread gender | |
Right-hand | Thread direction |
d | 25 mm | Bore diameter |
d2 | 60 mm | Head diameter |
B | 31 mm | Ball width |
G | M24x2 | Thread size |
C1 | 22 mm | Head width |
h | 94 mm | Base to Center-male |
α° | 15 ° | Tilt angle |
dk | 42.862 mm | Ball diameter |
d1 | 29.5 mm | Ball flange diameter |
l1 | 57 mm | Thread length-male |
l2 | 124 mm | Housing height -male |
l7 | 29 mm | Distance shank chamfer - centre rod end eye |
r1min | 0.3 mm | Chamfer |
C | 47.5 kN | Basic dynamic load rating |
C0 | 68 kN | Basic static load rating |
≈m | 0.64 kg | Weight |
Gr | 0~0.035 | Radial clearance |
Tmin | -50 °C | Operating temperature min. |
Tmax | 150 °C | Operating temperature max. |
SKF | INA (EGLES) | IKO | THK | LS |
SAKAC25M | GAKFR25PB GAKR25PB | POS25 | POS25 | SABP25S |