RBI20D, SQZ20RS, Zinc alloy Ball Joints, Inline, Female M20 x 1.5 RH Housing M20 x 1.5 RH Stud, Sealed
RBI-series zinc alloy link ball joint, housing is made of high-strength zinc alloy, the mounting bolt and the housing are arranged on the same axis, allowing this model to receive both a compressive load and a pulling load. Since grease in contained in the boot, this model achieves high lubricity and high wear-resistance.
| High-strength zinc alloy | Housing | |
| Bearing steel (58-64HRC) | Ball of Ball stud | |
| 1035 steel (20~28HRC) | Shank of Ball stud | |
| Neoprene | Boot |
| G | M20 x 1.5 RH | Housing Thread |
| G1 | M20 x 1.5 RH | Stud thread |
| L | 133 mm | Overall length |
| L1 | 63 mm | Length ball center to housing face |
| L2 | 10 mm | Housing wrench flat length |
| L3 | 38 mm | Housing thread length |
| d1 | 20 mm | Shaft diameter |
| d2 | 29 mm | Stud wrench flat diameter |
| M1 | 70 mm | Height centerline to stud face |
| M2 | 29 mm | Height centerline to wrench flat face |
| M3 | 25 mm | Stud thread length |
| D1 | 27.5 mm | Shank diameter, small |
| D2 | 34 mm | Shank diameter,large |
| D3 | 45 mm | Socket outside diameter |
| D4 | 50 mm | Boot diameter |
| W | 24 mm | Stud wrench across flat |
| W1 | 30 mm | Housing wrench across flat |
| dk | 28.575 mm | Ball diameter |
| 2α° | 10 ° | Permissible tilt angle |
| ≈m | 0.57 kg | Weight |
| CS | 37700 N | Tensile strength |
| CS | 75400 N | Compressive strength |
| PK | 18900 N | Yield point strength |
| 0.03 mm or less | Perpendicular to axis | |
| 0.1 mm or less | Axial Clearance |
chrome ball joints, chrome plated linkage ends, chrome plated linkages, chromed ball joints, chromed linkage ends, billet linkage, billet rods, chromed billet linkage, chromed billet ends, Juntas Esfericas Cromadas, Rotulas, SAE J490, Kugelgelenke, Kugelgelenk, verchromt
