TBS12, Zinc alloy link ball joints, Inline, Female M30 x 1.5 RH Housing M12 x 1.75 RH Stud
TBS-series zinc alloy link inline axial ball joints are constructed with a high-strength alloy steel housing , bearing steel ball, and 1035 steel case hardened stud shank. The rolled thread on the circumference of the outer ring allows this model to easily be mounted on the housing. Simply by tightening the screw, the user can achieve play-free, firm installation. Since the covering area of sphere is large, the model is capable of receiving a large axial load.
| High-strength zinc alloy | Housing | |
| Bearing steel (58-64HRC) | Ball of Ball stud | |
| 1035 steel (20~28HRC) | Shank of Ball stud |
| G | M30 x 1.5 RH | Housing Thread |
| G1 | M12 x 1.75 RH | Stud thread |
| L | 63 mm | Overall length |
| L1 | 12 mm | Length ball center to housing face |
| L2 | 3 mm | Housing wrench flat length |
| L3 | 15.5 mm | Housing thread length |
| L8 | 20 mm | Housing length |
| d1 | 12 mm | Shaft diameter |
| d2 | 19 mm | Stud wrench flat diameter |
| M2 | 21 mm | Height centerline to wrench flat face |
| M3 | 24 mm | Stud thread length |
| M4 | 30 mm | Shaft length |
| W | 17 mm | Stud wrench across flat |
| W1 | 27 mm | Housing wrench across flat |
| dk | 22.225 mm | Ball diameter |
| 2α° | 30 ° | Permissible tilt angle |
| ≈m | 0.13 kg | Weight |
| CSa | 18300 N | Tensile strength, axial direction |
| CSa | 35000 N | Compressive strength, axial direction |
| PK | 9220 N | Yield point strength |
| 0.03 mm or less | Perpendicular to axis | |
| 0.1 mm or less | Axial Clearance |
chrome ball joints, chrome plated linkage ends, chrome plated linkages, chromed ball joints, chromed linkage ends, billet linkage, billet rods, chromed billet linkage, chromed billet ends, Juntas Esfericas Cromadas, Rotulas, SAE J490, Kugelgelenke, Kugelgelenk, verchromt
