ES series is our 3-piece range of staked (swaged) design ball joints with rubber gaiter (grommet) to SAE J490 type G style 2, suitable for medium industrial/mechanical load applications. The swaging of the body produces a permanent assembly with the ball stud. Available in both metric and imperial thread sizes. Neoprene gaiter helps resist dirt contamination. If gaiter is not required please remove the letter S from the part number. Gaiters can also be called grommets and dust shields.
Carbon steel staked design ball joint
Stainless steel staked design ball joint
Temperature Range
Unified Standard Class 2A external threads and Class 2B internal threads shall apply to plain finish (unplated) parts. For externally components with additive finish, the maximum diameters of Class 2A may be exceeded by the amount of the allowance.; that is, the basic diameters (Class 2A maximum diameters plus the allowance) apply to an externally threaded part after plating. For internally threaded components with additive finish, the Class 2B diameters apply after plating. See ANSI B 1.1.
External threads shall be chamfered to a diameter 0.01 in (0.3mm) less than the minor diameter to produce a length of chamfered or partial thread to 3/4 to 1-1/4 times to the pitch (rounded to a three-place decimal).
Internal threads shall be countersunk 90 degree included angle to a diameter 0.01 in (0.3mm) greater more than the major diameter of the thread (rounded to a two-place decima).
Unless otherwise specified, carbon steel ball joints shall be furnished with cadmium or zinc protective finish and shall meet the requirements of 32 h salt spray test in accordance with ASTM B 117, Method of Slat Spray (Fog) Testing. At manufacture’s option, a subsequent chromated treatment may be used. Plated, hardened carbon steel components of ball joints (subject to hydrogen embrittlement) shall be baked or otherwise processed to obviate such embrittlement.
Unless otherwise specified by user, ball joints shall be supplied with ball sockets suitably lubricated in accordance with manufacture’s practice.
Ball joints must be free burrs, loose scale, sharp edges, and any other defect which might affect their serviceability.
What industries are using SAE J490 type G style 2 ball joints?
Where are SAE J490 type G style 2 ball joints used?
zinc plated ball joints, zinc plated linkage ends, chrome ball joints, chrome plated linkage ends, chrome plated linkages, chromed ball joints, chromed linkage ends, billet linkage, billet rods, chromed billet linkage, chromed billet ends, Juntas Esfericas Cromadas, Rotulas, SAE J490, Kugelgelenke, Kugelgelenk, verchromt,staked design ball joints, SAE J490 Type G Style 2 ball joints, high-quality ball joints, made in China ball joints, ball joints for industrial applications, ball joints for lawn and garden equipment, ball joints for agricultural equipment, ball joints for construction equipment, ball joints for automotive applications, ball joints for heavy-duty applications
