Inch yoke type track roller (cam yoke roller) with axial guidance and an inner ring
Inch yoke type track roller (cam yoke roller) are designed to run on and to be used in cam drives, bed ways, conveyor systems, linear guidance systems, etc. They have a thick-walled outer ring with a profiled outer running surface and are supplied ready-to-mount. They can support high radial loads as well as axial loads arising from slight misalignment and skewed running. The inner ring contains a lubrication hole to facilitate relubrication.
They are available in several designs and variants:
• with crowned or cylindrical outer running surface
• without cage (full complement needle roller set)
• gap seal on both sides or three-stage sealing by plastic axial plain washers
• high carbon chrome steel or stainless steel
• oxide black surface finish
Bearing tolerances and clearances
Recommended Shaft Diameters:
Support Roller