WELCOME TO C&H BEARING WEBSITE! C&H BEARING C&H
EN
0086-21-58356710
[email protected]
PRODUCTS
INDUSTRIES
RESOURCES
ABOUT US
CONTACT US
Metric rod ends maintenance free

C&H manufactures maintenance-free rod ends with three different sliding contact surface combinations in different series:
• Steel/PTFE composite
• Steel/PTFE fabric
• Steel/PTFE Plastic
Rod ends with either a steel/PTFE composite or steel/PTFE fabric sliding contact surface combination contain a bearing from the standard assortment. The outer ring is staked in place in the housing.
Rod ends with a steel/PTFE plastic sliding contact surface combination consist of a rod end housing and a spherical plain bearing inner ring. Between the housing and the inner ring, a sliding layer of fibre reinforced polymer, containing PTFE, is molded to the housing.
C&H supplies maintenance-free rod ends with a threaded shank with a right-hand thread as standard. All rod ends are also available with a left-hand thread. They are identified by the designation prefix or suffix L .

PRODUCT FILTERS AND TABLE

Bore diameter (mm)

~

Head diameter (mm)

~

Ball width (mm)

~

Sliding contact surface
Hard chromium/PTFE composite
Hard chromium/PTFE fabric
Hard chromium/PTFE plastic
Stainless steel/PTFE composite
Stainless steel/PTFE fabric
Material housing
Carbon steel
Stainless steel
Alloy steel
Material ball
Bearing steel
Stainless steel
Sealing
Without
2RS-Lip seals on both sides
Thread gender
Female
Male
Thread direction
Right-hand
Left-hand
Designation

Interchange code

RESET ALL
FILTERS
Toggle ： Metric Imperial   Sort By :
Designation Bore diameter Head diameter Ball width Thread size Head width Tilt angle Basic dynamic load rating Basic static load rating
d d2 B G C1 α° C C0
mm
mm
mm
mm
°
kN
kN
GAL30UK 30 73 22 M30×2 19 6 65 110
GAL25UK 25 64 20 M24×2 17 7 51 85
GAL40UK-2RS 40 92 28 M39×3 23 7 175 180
GAL35UK-2RS 35 82 25 M36×3 21 6 140 146
GAL40-1UK-2RS 40 92 28 M42×3 23 7 99 180
GAL45-1UK-2RS 45 102 32 M45×3 27 7 127 240
GAL45UK-2RS 45 102 32 M42×3 27 7 225 240
SAKB5F 5 18 8 M4x0.7 6 13 3.2 5.3
MXFL5 5 16 8 M5X0.8 6.25 14 22.31
MXMR5 5 16 8 M5X0.8 6.25 14 12.85
PHS14ECL 14 34 19 M14×2.0 13.5 16 33.6 17.2
PHS12ECL 12 30 16 M12×1.75 12 13 26.2 13.7
PHS10ECL 10 26 14 M10×1.5 10.5 13 19.6 10.5
PHS8ECL 8 22 12 M8×1.25 9 14 14 7.76
PHS6ECL 6 18 9 M6×1.0 6.75 13 8.41 4.94
SAKB22F 22 54 28 M22x1.5 20 15 38 58.5
SAKB20F 20 50 25 M20x1.5 18 15 31 50
SAKB18F 18 46 23 M18x1.5 16.5 15 26 41.5
SAKB16F 16 42 21 M16x2 15 15 21.4 34.5
SAKB14F 14 36 19 M14x2 13.5 16 17 25.5
SAKB12F 12 32 16 M12x1.75 12 13 13.2 15
SAKB10F 10 28 14 M10x1.5 10.5 14 9.8 12.5
SAKB8F 8 24 12 M8x1.25 9 14 7.1 10
SAKB6F 6 20 9 M6x1 6.75 13 4.2 6.8
MXFR16 16 38 21 M16X2.0 14.25 23 97.71
MXFR14 14 34.75 19 M14X2.0 13.5 21 90.38
MXFR12 12 30 16 M12X1.75 12 17 68.14
MXFR10 10 27 14 M10X1.5 10.5 17 63.44
MXFR8 8 22.25 12 M8X1.25 8.75 18 41.71
MXFR6 6 19 9 M6X1.0 7 13 34.39
GAL30UK
d Bore diameter 30 mm
d2 Head diameter 73 mm
B Ball width 22 mm
G Thread size M30×2
C1 Head width 19 mm
α° Tilt angle 6 °
C Basic dynamic load rating 65 kN
C0 Basic static load rating 110 kN
GAL25UK
d Bore diameter 25 mm
d2 Head diameter 64 mm
B Ball width 20 mm
G Thread size M24×2
C1 Head width 17 mm
α° Tilt angle 7 °
C Basic dynamic load rating 51 kN
C0 Basic static load rating 85 kN
GAL40UK-2RS
d Bore diameter 40 mm
d2 Head diameter 92 mm
B Ball width 28 mm
G Thread size M39×3
C1 Head width 23 mm
α° Tilt angle 7 °
C Basic dynamic load rating 175 kN
C0 Basic static load rating 180 kN
GAL35UK-2RS
d Bore diameter 35 mm
d2 Head diameter 82 mm
B Ball width 25 mm
G Thread size M36×3
C1 Head width 21 mm
α° Tilt angle 6 °
C Basic dynamic load rating 140 kN
C0 Basic static load rating 146 kN
GAL40-1UK-2RS
d Bore diameter 40 mm
d2 Head diameter 92 mm
B Ball width 28 mm
G Thread size M42×3
C1 Head width 23 mm
α° Tilt angle 7 °
C Basic dynamic load rating 99 kN
C0 Basic static load rating 180 kN
GAL45-1UK-2RS
d Bore diameter 45 mm
d2 Head diameter 102 mm
B Ball width 32 mm
G Thread size M45×3
C1 Head width 27 mm
α° Tilt angle 7 °
C Basic dynamic load rating 127 kN
C0 Basic static load rating 240 kN
GAL45UK-2RS
d Bore diameter 45 mm
d2 Head diameter 102 mm
B Ball width 32 mm
G Thread size M42×3
C1 Head width 27 mm
α° Tilt angle 7 °
C Basic dynamic load rating 225 kN
C0 Basic static load rating 240 kN
SAKB5F
d Bore diameter 5 mm
d2 Head diameter 18 mm
B Ball width 8 mm
G Thread size M4x0.7
C1 Head width 6 mm
α° Tilt angle 13 °
C Basic dynamic load rating 3.2 kN
C0 Basic static load rating 5.3 kN
MXFL5
d Bore diameter 5 mm
d2 Head diameter 16 mm
B Ball width 8 mm
G Thread size M5X0.8
C1 Head width 6.25 mm
α° Tilt angle 14 °
C Basic dynamic load rating
C0 Basic static load rating 22.31 kN
MXMR5
d Bore diameter 5 mm
d2 Head diameter 16 mm
B Ball width 8 mm
G Thread size M5X0.8
C1 Head width 6.25 mm
α° Tilt angle 14 °
C Basic dynamic load rating
C0 Basic static load rating 12.85 kN
PHS14ECL
d Bore diameter 14 mm
d2 Head diameter 34 mm
B Ball width 19 mm
G Thread size M14×2.0
C1 Head width 13.5 mm
α° Tilt angle 16 °
C Basic dynamic load rating 33.6 kN
C0 Basic static load rating 17.2 kN
PHS12ECL
d Bore diameter 12 mm
d2 Head diameter 30 mm
B Ball width 16 mm
G Thread size M12×1.75
C1 Head width 12 mm
α° Tilt angle 13 °
C Basic dynamic load rating 26.2 kN
C0 Basic static load rating 13.7 kN
PHS10ECL
d Bore diameter 10 mm
d2 Head diameter 26 mm
B Ball width 14 mm
G Thread size M10×1.5
C1 Head width 10.5 mm
α° Tilt angle 13 °
C Basic dynamic load rating 19.6 kN
C0 Basic static load rating 10.5 kN
PHS8ECL
d Bore diameter 8 mm
d2 Head diameter 22 mm
B Ball width 12 mm
G Thread size M8×1.25
C1 Head width 9 mm
α° Tilt angle 14 °
C Basic dynamic load rating 14 kN
C0 Basic static load rating 7.76 kN
PHS6ECL
d Bore diameter 6 mm
d2 Head diameter 18 mm
B Ball width 9 mm
G Thread size M6×1.0
C1 Head width 6.75 mm
α° Tilt angle 13 °
C Basic dynamic load rating 8.41 kN
C0 Basic static load rating 4.94 kN
SAKB22F
d Bore diameter 22 mm
d2 Head diameter 54 mm
B Ball width 28 mm
G Thread size M22x1.5
C1 Head width 20 mm
α° Tilt angle 15 °
C Basic dynamic load rating 38 kN
C0 Basic static load rating 58.5 kN
SAKB20F
d Bore diameter 20 mm
d2 Head diameter 50 mm
B Ball width 25 mm
G Thread size M20x1.5
C1 Head width 18 mm
α° Tilt angle 15 °
C Basic dynamic load rating 31 kN
C0 Basic static load rating 50 kN
SAKB18F
d Bore diameter 18 mm
d2 Head diameter 46 mm
B Ball width 23 mm
G Thread size M18x1.5
C1 Head width 16.5 mm
α° Tilt angle 15 °
C Basic dynamic load rating 26 kN
C0 Basic static load rating 41.5 kN
SAKB16F
d Bore diameter 16 mm
d2 Head diameter 42 mm
B Ball width 21 mm
G Thread size M16x2
C1 Head width 15 mm
α° Tilt angle 15 °
C Basic dynamic load rating 21.4 kN
C0 Basic static load rating 34.5 kN
SAKB14F
d Bore diameter 14 mm
d2 Head diameter 36 mm
B Ball width 19 mm
G Thread size M14x2
C1 Head width 13.5 mm
α° Tilt angle 16 °
C Basic dynamic load rating 17 kN
C0 Basic static load rating 25.5 kN
SAKB12F
d Bore diameter 12 mm
d2 Head diameter 32 mm
B Ball width 16 mm
G Thread size M12x1.75
C1 Head width 12 mm
α° Tilt angle 13 °
C Basic dynamic load rating 13.2 kN
C0 Basic static load rating 15 kN
SAKB10F
d Bore diameter 10 mm
d2 Head diameter 28 mm
B Ball width 14 mm
G Thread size M10x1.5
C1 Head width 10.5 mm
α° Tilt angle 14 °
C Basic dynamic load rating 9.8 kN
C0 Basic static load rating 12.5 kN
SAKB8F
d Bore diameter 8 mm
d2 Head diameter 24 mm
B Ball width 12 mm
G Thread size M8x1.25
C1 Head width 9 mm
α° Tilt angle 14 °
C Basic dynamic load rating 7.1 kN
C0 Basic static load rating 10 kN
SAKB6F
d Bore diameter 6 mm
d2 Head diameter 20 mm
B Ball width 9 mm
G Thread size M6x1
C1 Head width 6.75 mm
α° Tilt angle 13 °
C Basic dynamic load rating 4.2 kN
C0 Basic static load rating 6.8 kN
MXFR16
d Bore diameter 16 mm
d2 Head diameter 38 mm
B Ball width 21 mm
G Thread size M16X2.0
C1 Head width 14.25 mm
α° Tilt angle 23 °
C Basic dynamic load rating
C0 Basic static load rating 97.71 kN
MXFR14
d Bore diameter 14 mm
d2 Head diameter 34.75 mm
B Ball width 19 mm
G Thread size M14X2.0
C1 Head width 13.5 mm
α° Tilt angle 21 °
C Basic dynamic load rating
C0 Basic static load rating 90.38 kN
MXFR12
d Bore diameter 12 mm
d2 Head diameter 30 mm
B Ball width 16 mm
G Thread size M12X1.75
C1 Head width 12 mm
α° Tilt angle 17 °
C Basic dynamic load rating
C0 Basic static load rating 68.14 kN
MXFR10
d Bore diameter 10 mm
d2 Head diameter 27 mm
B Ball width 14 mm
G Thread size M10X1.5
C1 Head width 10.5 mm
α° Tilt angle 17 °
C Basic dynamic load rating
C0 Basic static load rating 63.44 kN
MXFR8
d Bore diameter 8 mm
d2 Head diameter 22.25 mm
B Ball width 12 mm
G Thread size M8X1.25
C1 Head width 8.75 mm
α° Tilt angle 18 °
C Basic dynamic load rating
C0 Basic static load rating 41.71 kN
MXFR6
d Bore diameter 6 mm
d2 Head diameter 19 mm
B Ball width 9 mm
G Thread size M6X1.0
C1 Head width 7 mm
α° Tilt angle 13 °
C Basic dynamic load rating
C0 Basic static load rating 34.39 kN
Bore diameter
d
30 mm
Head diameter
d2
73 mm
Ball width
B
22 mm
Thread size
G
M30×2
Head width
C1
19 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
65 kN
Basic static load rating
C0
110 kN
Bore diameter
d
25 mm
Head diameter
d2
64 mm
Ball width
B
20 mm
Thread size
G
M24×2
Head width
C1
17 mm
Tilt angle
α°
7 °
Basic dynamic load rating
C
51 kN
Basic static load rating
C0
85 kN
Bore diameter
d
40 mm
Head diameter
d2
92 mm
Ball width
B
28 mm
Thread size
G
M39×3
Head width
C1
23 mm
Tilt angle
α°
7 °
Basic dynamic load rating
C
175 kN
Basic static load rating
C0
180 kN
Bore diameter
d
35 mm
Head diameter
d2
82 mm
Ball width
B
25 mm
Thread size
G
M36×3
Head width
C1
21 mm
Tilt angle
α°
6 °
Basic dynamic load rating
C
140 kN
Basic static load rating
C0
146 kN
Bore diameter
d
40 mm
Head diameter
d2
92 mm
Ball width
B
28 mm
Thread size
G
M42×3
Head width
C1
23 mm
Tilt angle
α°
7 °
Basic dynamic load rating
C
99 kN
Basic static load rating
C0
180 kN
Bore diameter
d
45 mm
Head diameter
d2
102 mm
Ball width
B
32 mm
Thread size
G
M45×3
Head width
C1
27 mm
Tilt angle
α°
7 °
Basic dynamic load rating
C
127 kN
Basic static load rating
C0
240 kN
Bore diameter
d
45 mm
Head diameter
d2
102 mm
Ball width
B
32 mm
Thread size
G
M42×3
Head width
C1
27 mm
Tilt angle
α°
7 °
Basic dynamic load rating
C
225 kN
Basic static load rating
C0
240 kN
Bore diameter
d
5 mm
Head diameter
d2
18 mm
Ball width
B
8 mm
Thread size
G
M4x0.7
Head width
C1
6 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
3.2 kN
Basic static load rating
C0
5.3 kN
Bore diameter
d
5 mm
Head diameter
d2
16 mm
Ball width
B
8 mm
Thread size
G
M5X0.8
Head width
C1
6.25 mm
Tilt angle
α°
14 °
Basic dynamic load rating
C
Basic static load rating
C0
22.31 kN
Bore diameter
d
5 mm
Head diameter
d2
16 mm
Ball width
B
8 mm
Thread size
G
M5X0.8
Head width
C1
6.25 mm
Tilt angle
α°
14 °
Basic dynamic load rating
C
Basic static load rating
C0
12.85 kN
Bore diameter
d
14 mm
Head diameter
d2
34 mm
Ball width
B
19 mm
Thread size
G
M14×2.0
Head width
C1
13.5 mm
Tilt angle
α°
16 °
Basic dynamic load rating
C
33.6 kN
Basic static load rating
C0
17.2 kN
Bore diameter
d
12 mm
Head diameter
d2
30 mm
Ball width
B
16 mm
Thread size
G
M12×1.75
Head width
C1
12 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
26.2 kN
Basic static load rating
C0
13.7 kN
Bore diameter
d
10 mm
Head diameter
d2
26 mm
Ball width
B
14 mm
Thread size
G
M10×1.5
Head width
C1
10.5 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
19.6 kN
Basic static load rating
C0
10.5 kN
Bore diameter
d
8 mm
Head diameter
d2
22 mm
Ball width
B
12 mm
Thread size
G
M8×1.25
Head width
C1
9 mm
Tilt angle
α°
14 °
Basic dynamic load rating
C
14 kN
Basic static load rating
C0
7.76 kN
Bore diameter
d
6 mm
Head diameter
d2
18 mm
Ball width
B
9 mm
Thread size
G
M6×1.0
Head width
C1
6.75 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
8.41 kN
Basic static load rating
C0
4.94 kN
Bore diameter
d
22 mm
Head diameter
d2
54 mm
Ball width
B
28 mm
Thread size
G
M22x1.5
Head width
C1
20 mm
Tilt angle
α°
15 °
Basic dynamic load rating
C
38 kN
Basic static load rating
C0
58.5 kN
Bore diameter
d
20 mm
Head diameter
d2
50 mm
Ball width
B
25 mm
Thread size
G
M20x1.5
Head width
C1
18 mm
Tilt angle
α°
15 °
Basic dynamic load rating
C
31 kN
Basic static load rating
C0
50 kN
Bore diameter
d
18 mm
Head diameter
d2
46 mm
Ball width
B
23 mm
Thread size
G
M18x1.5
Head width
C1
16.5 mm
Tilt angle
α°
15 °
Basic dynamic load rating
C
26 kN
Basic static load rating
C0
41.5 kN
Bore diameter
d
16 mm
Head diameter
d2
42 mm
Ball width
B
21 mm
Thread size
G
M16x2
Head width
C1
15 mm
Tilt angle
α°
15 °
Basic dynamic load rating
C
21.4 kN
Basic static load rating
C0
34.5 kN
Bore diameter
d
14 mm
Head diameter
d2
36 mm
Ball width
B
19 mm
Thread size
G
M14x2
Head width
C1
13.5 mm
Tilt angle
α°
16 °
Basic dynamic load rating
C
17 kN
Basic static load rating
C0
25.5 kN
Bore diameter
d
12 mm
Head diameter
d2
32 mm
Ball width
B
16 mm
Thread size
G
M12x1.75
Head width
C1
12 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
13.2 kN
Basic static load rating
C0
15 kN
Bore diameter
d
10 mm
Head diameter
d2
28 mm
Ball width
B
14 mm
Thread size
G
M10x1.5
Head width
C1
10.5 mm
Tilt angle
α°
14 °
Basic dynamic load rating
C
9.8 kN
Basic static load rating
C0
12.5 kN
Bore diameter
d
8 mm
Head diameter
d2
24 mm
Ball width
B
12 mm
Thread size
G
M8x1.25
Head width
C1
9 mm
Tilt angle
α°
14 °
Basic dynamic load rating
C
7.1 kN
Basic static load rating
C0
10 kN
Bore diameter
d
6 mm
Head diameter
d2
20 mm
Ball width
B
9 mm
Thread size
G
M6x1
Head width
C1
6.75 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
4.2 kN
Basic static load rating
C0
6.8 kN
Bore diameter
d
16 mm
Head diameter
d2
38 mm
Ball width
B
21 mm
Thread size
G
M16X2.0
Head width
C1
14.25 mm
Tilt angle
α°
23 °
Basic dynamic load rating
C
Basic static load rating
C0
97.71 kN
Bore diameter
d
14 mm
Head diameter
d2
34.75 mm
Ball width
B
19 mm
Thread size
G
M14X2.0
Head width
C1
13.5 mm
Tilt angle
α°
21 °
Basic dynamic load rating
C
Basic static load rating
C0
90.38 kN
Bore diameter
d
12 mm
Head diameter
d2
30 mm
Ball width
B
16 mm
Thread size
G
M12X1.75
Head width
C1
12 mm
Tilt angle
α°
17 °
Basic dynamic load rating
C
Basic static load rating
C0
68.14 kN
Bore diameter
d
10 mm
Head diameter
d2
27 mm
Ball width
B
14 mm
Thread size
G
M10X1.5
Head width
C1
10.5 mm
Tilt angle
α°
17 °
Basic dynamic load rating
C
Basic static load rating
C0
63.44 kN
Bore diameter
d
8 mm
Head diameter
d2
22.25 mm
Ball width
B
12 mm
Thread size
G
M8X1.25
Head width
C1
8.75 mm
Tilt angle
α°
18 °
Basic dynamic load rating
C
Basic static load rating
C0
41.71 kN
Bore diameter
d
6 mm
Head diameter
d2
19 mm
Ball width
B
9 mm
Thread size
G
M6X1.0
Head width
C1
7 mm
Tilt angle
α°
13 °
Basic dynamic load rating
C
Basic static load rating
C0
34.39 kN
Series

C&H manufactures maintenance-free rod ends with three different sliding contact surface combinations in different series:
• Steel/PTFE composite:
– GIKR(L) .. PW series
– GAKR(L).. PW series
– GIKR(L) .. PS series
– GAKR(L).. PS series
– SI(L) .. C series / GIR(L)..UK series
– SA(L) .. C series / GAR(L)..UK series
• Steel/PTFE fabric:
– SI(L) .. TXE-2RS series / GIR(L)..UK-2RS series
– SI(L)A .. TXE-2RS series
– SA(L) .. TXE-2RS series / GAR(L)..UK-2RS series
– SA(L)A .. TXE-2RS series
• Steel/PTFE Plastic :
– SI(L)KB .. F series
– SA(L)KB .. F series

Dimensions

The dimensions of C&H maintenance-free rod ends are in accordance with ISO 12240-4:1998.
Male and female threads of C&H rod ends are in accordance with ISO 965-1:1998.
Female rod ends having a fine pitch thread is in accordance with ISO 8139:2009.
Series GIKPR..-PW and GIKPSR..-PS has a fine pitch thread connector for standard pneumatic cylinders to DIN ISO 15552 (right hand thread only).

Tolerance and Clearance

Tolerance 

C&H rod end inner ring dimensional tolerances are in accordance with ISO 12240-1:1998. The tolerances are listed in table 1.
The symbols used in table 1 are explained in the following:
d           nominal bore diameter
Δdmp   deviation of the mean bore diameter from the nominal
ΔBs       deviation of the single inner ring width from the nominal

Inner ring dimensional tolerances for maintenance-free rod ends 

 

Clearance

Radial internal clearance, preload Depending on their design, maintenance-free rod ends may have a radial internal clearance or a light preload. Table 2 lists maximum values for the radial internal clearance as well as for the frictional moment in the circumferential direction caused by preload.

Radial internal clearance and frictional moment for maintenance-free rod ends

 

111

ISO CERTIFICATE
ABOUT US
CONTACT US
SOCIAL MEDIAS
MOBILE APPS
©Copyright 2022 C&H Bearing, All Rights Reserved Terms of use Privacy Policy SITEMAP
C&H BEARING WEBSITE
×