Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, extended inner ring, sealed, metric sizes
Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. The bearing can be relubricated via lubrication holes and an annular groove in both rings.
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Lip seals | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 110 mm | Bore diameter |
| D | 160 mm | Outside diameter |
| B | 90 mm | Width inner ring |
| C | 55 mm | Width outer ring |
| dk | 140 mm | Ball diameter |
| a | 3 ° | Tilt angle |
| d2 | 124 mm | Connection measure Inner ring |
| r1 | 0.6 mm | Chamfer dimension |
| r2 | 1 mm | Chamfer dimension |
| Cr | 655 kN | Basic dynamic load rating, radial |
| C0r | 3280 kN | Basic static load rating, radial |
| ≈m | 5.18 kg | Weight |
| da max | 124 mm | Connection measure inner ring, max. |
| Da min | 134 mm | Housing connection diameter, min. |
| ra min | 0.6 mm | Fillet radius shaft, min |
| rb max | 1 mm | Fillet radius housing, max. |
| Min. | 0.085 mm | Radial clearance |
| Max. | 0.165 mm | Radial clearance |
| dUT | -0.02 mm | Bore diameter,lower tolerance |
| DUT | -0.025 mm | Outside diameter,lower tolerance |
| BOT | 0.30 mm | Inner ring width,upper tolerance |
| BUT | -0.3 mm | Inner ring width,lower tolerance |
| CUT | -0.5 mm | Outer ring width, lower tolerance |
© Copyright 2022 C&H Bearing, Все права защищены
Условия эксплуатации политика конфиденциальности
КАРТА САЙТА