Radial spherical plain bearing, requiring maintenance, steel/steel sliding contact surface, metric sizes, DIN ISO 12240-1, dimension series E
Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. The bearing can be relubricated via lubrication holes and an annular groove in both rings.
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Without | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 17 mm | Bore diameter |
| D | 30 mm | Outside diameter |
| B | 14 mm | Width inner ring |
| C | 10 mm | Width outer ring |
| dk | 25 mm | Ball diameter |
| a | 10 ° | Tilt angle |
| r1 | 0.3 mm | Chamfer dimension |
| r2 | 0.3 mm | Chamfer dimension |
| Cr | 21.2 kN | Basic dynamic load rating, radial |
| C0r | 106 kN | Basic static load rating, radial |
| ≈m | 0.041 kg | Weight |
| da min | 19 mm | Connection measure inner ring, min. |
| da max | 20.7 mm | Connection measure inner ring, max. |
| Da min | 24 mm | Housing connection diameter, min. |
| Da max | 28.3 mm | Housing Shoulder diameter, max. |
| ra min | 0.3 mm | Fillet radius shaft, min |
| rb max | 0.3 mm | Fillet radius housing, max. |
| Min. | 0.040 mm | Radial clearance |
| Max. | 0.082 mm | Radial clearance |
| dUT | -0.008 mm | Bore diameter,lower tolerance |
| DUT | -0.009 mm | Outside diameter,lower tolerance |
| BUT | -0.12 mm | Inner ring width,lower tolerance |
| CUT | -0.24 mm | Outer ring width, lower tolerance |
| Tmin | -50 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
| SKF | INA | RBC | AURORA | TORRINGTON | IKO | NTN | LS |
| GE17ES | GE17DO | MB17 | GE17ES | 17FS30 | GE17ES | SA1-17B | GE17ES |
© Copyright 2022 C&H Bearing, Все права защищены
Условия эксплуатации политика конфиденциальности
КАРТА САЙТА