Radial spherical plain bearing, requiring maintenance, steel/steel sliding contact surface, sealed, metric sizes, DIN ISO 12240-1, dimension series E
Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. The bearing can be relubricated via lubrication holes and an annular groove in both rings.
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Lip seals | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 200 mm | Bore diameter |
| D | 290 mm | Outside diameter |
| B | 130 mm | Width inner ring |
| C | 100 mm | Width outer ring |
| dk | 250 mm | Ball diameter |
| a | 7 ° | Tilt angle |
| r1 | 1.1 mm | Chamfer dimension |
| r2 | 1.1 mm | Chamfer dimension |
| Cr | 2120 kN | Basic dynamic load rating, radial |
| C0r | 10600 kN | Basic static load rating, radial |
| ≈m | 28.00 kg | Weight |
| da min | 212.5 mm | Connection measure inner ring, min. |
| da max | 213.5 mm | Connection measure inner ring, max. |
| Da min | 239 mm | Housing connection diameter, min. |
| Da max | 279.5 mm | Housing Shoulder diameter, max. |
| ra min | 1 mm | Fillet radius shaft, min |
| rb max | 1 mm | Fillet radius housing, max. |
| Min. | 0.100 mm | Radial clearance |
| Max. | 0.192 mm | Radial clearance |
| dUT | -0.030 mm | Bore diameter,lower tolerance |
| DUT | -0.035 mm | Outside diameter,lower tolerance |
| BUT | -0.30 mm | Inner ring width,lower tolerance |
| CUT | -0.70 mm | Outer ring width, lower tolerance |
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 130 °C | Operating temperature max. |
| SKF | INA (ELGES) | RBC | TORRINGTON | IKO | LS |
| GE200ES-2RS | GE200DO-2RS | MB200-9LSS | 200FS290-SS | GE200ES-2RS | GE200ES-2RS |
© Copyright 2022 C&H Bearing, Все права защищены
Условия эксплуатации политика конфиденциальности
КАРТА САЙТА