Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, extended inner ring, sealed, metric sizes
Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. The bearing can be relubricated via lubrication holes and an annular groove in both rings.
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Lip seals | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 20 mm | Bore diameter |
| D | 35 mm | Outside diameter |
| B | 24 mm | Width inner ring |
| C | 12 mm | Width outer ring |
| dk | 29 mm | Ball diameter |
| a | 3 ° | Tilt angle |
| d2 | 24 mm | Connection measure Inner ring |
| r1 | 0.2 mm | Chamfer dimension |
| r2 | 0.3 mm | Chamfer dimension |
| Cr | 30 kN | Basic dynamic load rating, radial |
| C0r | 146 kN | Basic static load rating, radial |
| ≈m | 0.07 kg | Weight |
| da min | 23 mm | Connection measure inner ring, min. |
| da max | 24 mm | Connection measure inner ring, max. |
| Da min | 27.5 mm | Housing connection diameter, min. |
| Da max | 33.2 mm | Housing Shoulder diameter, max. |
| ra min | 0.2 mm | Fillet radius shaft, min |
| rb max | 0.3 mm | Fillet radius housing, max. |
| Min. | 0.04 mm | Radial clearance |
| Max. | 0.082 mm | Radial clearance |
| dUT | -0.010 mm | Bore diameter,lower tolerance |
| DUT | -0.011 mm | Outside diameter,lower tolerance |
| BOT | 0.20 mm | Inner ring width,upper tolerance |
| BUT | -0.20 mm | Inner ring width,lower tolerance |
| CUT | -0.24 mm | Outer ring width, lower tolerance |
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 130 °C | Operating temperature max. |
| SKF | INA (ELGES) | LS |
| GEM20ES-2RS | GE20HO-2RS | GEEM20ES-2RS |
© Copyright 2022 C&H Bearing, Все права защищены
Условия эксплуатации политика конфиденциальности
КАРТА САЙТА