Radial spherical plain bearing, requiring maintenance, steel/steel sliding contact surface, sealed, metric sizes, DIN ISO 12240-1, dimension series E
Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. The bearing can be relubricated via lubrication holes and an annular groove in both rings.
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Lip seals | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 260 mm | Bore diameter |
| D | 370 mm | Outside diameter |
| B | 150 mm | Width inner ring |
| C | 110 mm | Width outer ring |
| dk | 325 mm | Ball diameter |
| a | 7 ° | Tilt angle |
| r1 | 1.1 mm | Chamfer dimension |
| r2 | 1.1 mm | Chamfer dimension |
| Cr | 3050 kN | Basic dynamic load rating, radial |
| C0r | 15300 kN | Basic static load rating, radial |
| ≈m | 51.54 kg | Weight |
| da min | 273 mm | Connection measure inner ring, min. |
| da max | 288.3 mm | Connection measure inner ring, max. |
| Da min | 319 mm | Housing connection diameter, min. |
| Da max | 359 mm | Housing Shoulder diameter, max. |
| ra min | 1 mm | Fillet radius shaft, min |
| rb max | 1 mm | Fillet radius housing, max. |
| Min. | 0.125 mm | Radial clearance |
| Max. | 0.239 mm | Radial clearance |
| dUT | -0.035 mm | Bore diameter,lower tolerance |
| DUT | -0.040 mm | Outside diameter,lower tolerance |
| BUT | -0.35 mm | Inner ring width,lower tolerance |
| CUT | -0.80 mm | Outer ring width, lower tolerance |
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 130 °C | Operating temperature max. |
| SKF | INA (ELGES) | RBC | TORRINGTON | IKO | LS |
| GE260ES-2RS | GE260DO-2RS | MB260-9LSS | 260FS370-SS | GE260ES-2RS | GE260ES-2RS |
© Copyright 2022 C&H Bearing, Все права защищены
Условия эксплуатации политика конфиденциальности
КАРТА САЙТА