Stainless steel radial spherical plain bearings to ISO 12 240-1(DIN648), dimension series E, corrosion resistance, maintenance-free, sliding contact surface hard chromium/PTFE fabric
| Maintenance-free | Maintenance | |
| Hard chromium/PTFE fabric | Sliding contact surface | |
| NBR seals with sheet steel insert | Sealing | |
| Stainless steel | Material, inner ring | |
| Stainless steel | Material, outer ring |
| d | 50 mm | Bore diameter |
| D | 75 mm | Outside diameter |
| B | 35 mm | Width inner ring |
| C | 28 mm | Width outer ring |
| dk | 66 mm | Ball diameter |
| a | 6 ° | Tilt angle |
| r1 | 0.6 mm | Chamfer dimension |
| r2 | 1 mm | Chamfer dimension |
| Cr | 440 kN | Basic dynamic load rating, radial |
| C0r | 735 kN | Basic static load rating, radial |
| ≈m | 0.562 kg | Weight |
| da min | 54.6 mm | Connection measure inner ring, min. |
| da max | 56 mm | Connection measure inner ring, max. |
| Da min | 62.7 mm | Housing connection diameter, min. |
| Da max | 70.5 mm | Housing Shoulder diameter, max. |
| ra min | 0.6 mm | Fillet radius shaft, min |
| rb max | 1 mm | Fillet radius housing, max. |
| Max. | 0.06 mm | Radial clearance |
| dUT | -0.012 mm | Bore diameter,lower tolerance |
| DUT | -0.013 mm | Outside diameter,lower tolerance |
| BUT | -0.12 mm | Inner ring width,lower tolerance |
| CUT | -0.30 mm | Outer ring width, lower tolerance |
| Tmin | -25 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
| SKF | LS |
| GE50TXG3E-2LS | GE50ETL-2GS/X |
© Copyright 2022 C&H Bearing, Все права защищены
Условия эксплуатации политика конфиденциальности
КАРТА САЙТА