Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel , non-separable design
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Without | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 100 mm | Bore diameter |
| D | 160 mm | Outside diameter |
| B | 88 mm | Width inner ring |
| C | 75 mm | Width outer ring |
| dk | 150 mm | Ball diameter |
| a | 5 ° | Tilt angle |
| d2 | 121.5 mm | Connection measure Inner ring |
| r1 | 1.5 mm | Chamfer dimension |
| r2 | 15 mm | Chamfer dimension |
| Cr | 956 kN | Basic dynamic load rating, radial |
| C0r | 4780 kN | Basic static load rating, radial |
| ≈m | 7.56 kg | Weight |
| da min | 105.5 mm | Connection measure inner ring, min. |
| da max | 121.5 mm | Connection measure inner ring, max. |
| Da min | 139 mm | Housing connection diameter, min. |
| Da max | 154.5 mm | Housing Shoulder diameter, max. |
| ra min | 1.5 mm | Fillet radius shaft, min |
| rb max | 15 mm | Fillet radius housing, max. |
| Min. | 0.085 mm | Radial clearance |
| Max. | 0.165 mm | Radial clearance |
| dUT | -0.02 mm | Bore diameter,lower tolerance |
| DUT | -0.018 mm | Outside diameter,lower tolerance |
| BUT | -0.2 mm | Inner ring width,lower tolerance |
| CUT | -0.5 mm | Outer ring width, lower tolerance |
| Tmin | -50 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
| IKO | NTN | LS |
| SB100A | SA4-100B | GEF100ES |
© Copyright 2022 C&H Bearing, Все права защищены
Условия эксплуатации политика конфиденциальности
КАРТА САЙТА