Radial spherical plain bearing, requiring maintenance, steel/steel sliding contact surface, metric sizes, DIN ISO 12240-1, dimension series G
Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. The bearing can be relubricated via lubrication holes and an annular groove in both rings. Compared to the GE series, they have a wider inner ring and a larger outside diameter, which enable higher load ratings and larger tilt angles.
| Requiring maintenance | Maintenance | |
| Steel/Steel | Sliding contact surface | |
| Without | Sealing | |
| Bearing steel | Material, inner ring | |
| Bearing steel | Material, outer ring |
| d | 140 mm | Bore diameter |
| D | 230 mm | Outside diameter |
| B | 130 mm | Width inner ring |
| C | 80 mm | Width outer ring |
| dk | 200 mm | Ball diameter |
| a | 16 ° | Tilt angle |
| r1 | 1 mm | Chamfer dimension |
| r2 | 1 mm | Chamfer dimension |
| Cr | 1360 kN | Basic dynamic load rating, radial |
| C0r | 6800 kN | Basic static load rating, radial |
| ≈m | 19.01 kg | Weight |
| da min | 130 mm | Connection measure inner ring, min. |
| da max | 151.9 mm | Connection measure inner ring, max. |
| Da min | 191 mm | Housing connection diameter, min. |
| Min. | 0.085 mm | Radial clearance |
| Max. | 0.165 mm | Radial clearance |
| dUT | -0.025 mm | Bore diameter,lower tolerance |
| DUT | -0.030 mm | Outside diameter,lower tolerance |
| BUT | -0.25 mm | Inner ring width,lower tolerance |
| CUT | -0.60 mm | Outer ring width, lower tolerance |
| Tmin | -50 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
| INA (ELGES) | RBC | AURORA | TORRINGTON | IKO | LS |
| GE140FO | MBH140160-9L | GEG140ES | 140FSH230 | GE140GS | GEG140ES |
© Copyright 2022 C&H Bearing, Все права защищены
Условия эксплуатации политика конфиденциальности
КАРТА САЙТА