GEG4E

Radial spherical plain bearing, requiring maintenance, steel/steel sliding contact surface, metric sizes, DIN ISO 12240-1, dimension series G

Radial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. The bearing can be relubricated only from the side. Compared to the GE series, they have a wider inner ring and a larger outside diameter, which enable higher load ratings and larger tilt angles.

Inner ring: Bearing steel, through-hardened and ground, phosphate, sliding contact surface coating molybdenum disulfide (MoS2)
Outer ring: Bearing steel, through-hardened and ground, phosphate, sliding contact surface coating molybdenum disulfide (MoS2), single fracture split

Цена :

Минимальное количество для заказа :

Время выполнения :

РАССЛЕДОВАНИЕ

Display : Метрика Дюйм

Properties

	Requiring maintenance	Maintenance
	Steel/Steel	Sliding contact surface
	Without	Sealing
	Bearing steel	Material, inner ring
	Bearing steel	Material, outer ring

Dimensions

d	4 mm	Bore diameter
D	14 mm	Outside diameter
B	7 mm	Width inner ring
C	4 mm	Width outer ring
d_k	10 mm	Ball diameter
a	20 °	Tilt angle
r₁	0.3 mm	Chamfer dimension
r₂	0.3 mm	Chamfer dimension

Load Capacity

C_r	3.4 kN	Basic dynamic load rating, radial
C_0r	17 kN	Basic static load rating, radial

Weight

≈m

0.005 kg

Weight

Mounting dimensions

d_{a max}	6.2 mm	Connection measure inner ring, max.
D_{a min}	7.6 mm	Housing connection diameter, min.

Radial clearance

Min.	0.032 mm	Radial clearance
Max.	0.068 mm	Radial clearance

Tolerance

d_UT	-0.008 mm	Bore diameter,lower tolerance
D_UT	-0.008 mm	Outside diameter,lower tolerance
B_UT	-0.12 mm	Inner ring width,lower tolerance
C_UT	-0.24 mm	Outer ring width, lower tolerance

Temperature range

T_min	-50 °C	Operating temperature min.
T_max	150 °C	Operating temperature max.

LS
GEG4E

GEG4E

TECHNICAL INFORMATION

INTERCHANGE CODE TABLE

C&H BEARING WEBSITE