Cam follower (stud-type track roller) NUKR

Designation	Stud diameter	Overall width	Outside diameter	Outer ring width	Thread stud	Thread length	Maximum dynamic radial load	Maximum static radial load
NUKR 30	12	40	30	14	M12 x 1.5	15	2.62	13.5
NUKR 35	16	52	35	18	M16 x 1.5	17	8.6	16.8
NUKR 40	18	58	40	20	M18 x 1.5	19	13.1	22.6
NUKR 47	20	66	47	24	M20 x 1.5	21	16.4	35
NUKR 52	20	66	52	24	M20 x 1.5	21	17.3	37.5
NUKR 62	24	80	62	29	M24 x 1.5	25	23.5	50
NUKR 72	24	80	72	29	M24 x 1.5	25	32	50
NUKR 80	30	100	80	35	M30 x 1.5	32	47.5	98
NUKR 90	30	100	90	35	M30 x 1.5	32	77	117
NUKR 100	36	120	100	43	M36 x 1.5	38	130	167
NUKR 120	42	140	120	50	M42 x 1.5	44	164	266
NUKR 140	48	160	140	57	M48 x 1.5	52	200	294
NUKR 150	52	170	150	60	M52 x 1.5	52	220	380
NUKR 160	56	180	160	63	M56 x 2	58	240	400
NUKR 170	60	190	170	66	M60x2	58	260	475
NUKR 180	64	200	180	72	M64 x 2	65	279	555
NUKR 35 X	16	52	35	18	M16 x 1.5	17	8.6	16.8
NUKR 40 X	18	58	40	20	M18 x 1.5	19	13.1	22.6
NUKR 47 X	20	66	47	24	M20 x 1.5	21	16.4	35
NUKR 52 X	20	66	52	24	M20 x 1.5	21	17.3	37.5
NUKR 62 X	24	80	62	29	M24 x 1.5	25	23.5	50
NUKR 72 X	24	80	72	29	M24 x 1.5	25	32	50
NUKR 80 X	30	100	80	35	M30 x 1.5	32	47.5	98
NUKR 90 X	30	100	90	35	M30 x 1.5	32	77	117
NUKRE 35	16	52	35	18	M16 x 1.5	17	8.6	16.8
NUKRE 40	18	58	40	20	M18 x 1.5	19	13.1	22.6
NUKRE 47	20	66	47	24	M20 x 1.5	21	16.4	35
NUKRE 52	20	66	52	24	M20 x 1.5	21	17.3	37.5
NUKRE 62	24	80	62	29	M24 x 1.5	25	23.5	50
NUKRE 72	24	80	72	29	M24 x 1.5	25	32	50

Designation

Stud diameter

Overall width

Outside diameter

Outer ring width

Thread stud

Thread length

Maximum dynamic radial load

Maximum static radial load

G₁

F_r

F_0r

NUKR 30

M12 x 1.5

2.62

13.5

NUKR 35

M16 x 1.5

8.6

16.8

NUKR 40

M18 x 1.5

13.1

22.6

NUKR 47

M20 x 1.5

16.4

NUKR 52

M20 x 1.5

17.3

37.5

NUKR 62

M24 x 1.5

23.5

NUKR 72

M24 x 1.5

NUKR 80

100

M30 x 1.5

47.5

NUKR 90

100

M30 x 1.5

117

NUKR 100

120

100

M36 x 1.5

130

167

NUKR 120

140

120

M42 x 1.5

164

266

NUKR 140

160

140

M48 x 1.5

200

294

NUKR 150

170

150

M52 x 1.5

220

380

NUKR 160

180

160

M56 x 2

240

400

NUKR 170

190

170

M60x2

260

475

NUKR 180

200

180

M64 x 2

279

555

NUKR 35 X

M16 x 1.5

8.6

16.8

NUKR 40 X

M18 x 1.5

13.1

22.6

NUKR 47 X

M20 x 1.5

16.4

NUKR 52 X

M20 x 1.5

17.3

37.5

NUKR 62 X

M24 x 1.5

23.5

NUKR 72 X

M24 x 1.5

NUKR 80 X

100

M30 x 1.5

47.5

NUKR 90 X

100

M30 x 1.5

117

NUKRE 35

M16 x 1.5

8.6

16.8

NUKRE 40

M18 x 1.5

13.1

22.6

NUKRE 47

M20 x 1.5

16.4

NUKRE 52

M20 x 1.5

17.3

37.5

NUKRE 62

M24 x 1.5

23.5

NUKRE 72

M24 x 1.5

NUKR 30

d	Stud diameter	12 mm
B	Overall width	40 mm
D	Outside diameter	30 mm
C	Outer ring width	14 mm
G	Thread stud	M12 x 1.5
G₁	Thread length	15 mm
F_r	Maximum dynamic radial load	2.62 kN
F_0r	Maximum static radial load	13.5 kN

NUKR 35

d	Stud diameter	16 mm
B	Overall width	52 mm
D	Outside diameter	35 mm
C	Outer ring width	18 mm
G	Thread stud	M16 x 1.5
G₁	Thread length	17 mm
F_r	Maximum dynamic radial load	8.6 kN
F_0r	Maximum static radial load	16.8 kN

NUKR 40

d	Stud diameter	18 mm
B	Overall width	58 mm
D	Outside diameter	40 mm
C	Outer ring width	20 mm
G	Thread stud	M18 x 1.5
G₁	Thread length	19 mm
F_r	Maximum dynamic radial load	13.1 kN
F_0r	Maximum static radial load	22.6 kN

NUKR 47

d	Stud diameter	20 mm
B	Overall width	66 mm
D	Outside diameter	47 mm
C	Outer ring width	24 mm
G	Thread stud	M20 x 1.5
G₁	Thread length	21 mm
F_r	Maximum dynamic radial load	16.4 kN
F_0r	Maximum static radial load	35 kN

NUKR 52

d	Stud diameter	20 mm
B	Overall width	66 mm
D	Outside diameter	52 mm
C	Outer ring width	24 mm
G	Thread stud	M20 x 1.5
G₁	Thread length	21 mm
F_r	Maximum dynamic radial load	17.3 kN
F_0r	Maximum static radial load	37.5 kN

NUKR 62

d	Stud diameter	24 mm
B	Overall width	80 mm
D	Outside diameter	62 mm
C	Outer ring width	29 mm
G	Thread stud	M24 x 1.5
G₁	Thread length	25 mm
F_r	Maximum dynamic radial load	23.5 kN
F_0r	Maximum static radial load	50 kN

NUKR 72

d	Stud diameter	24 mm
B	Overall width	80 mm
D	Outside diameter	72 mm
C	Outer ring width	29 mm
G	Thread stud	M24 x 1.5
G₁	Thread length	25 mm
F_r	Maximum dynamic radial load	32 kN
F_0r	Maximum static radial load	50 kN

NUKR 80

d	Stud diameter	30 mm
B	Overall width	100 mm
D	Outside diameter	80 mm
C	Outer ring width	35 mm
G	Thread stud	M30 x 1.5
G₁	Thread length	32 mm
F_r	Maximum dynamic radial load	47.5 kN
F_0r	Maximum static radial load	98 kN

NUKR 90

d	Stud diameter	30 mm
B	Overall width	100 mm
D	Outside diameter	90 mm
C	Outer ring width	35 mm
G	Thread stud	M30 x 1.5
G₁	Thread length	32 mm
F_r	Maximum dynamic radial load	77 kN
F_0r	Maximum static radial load	117 kN

NUKR 100

d	Stud diameter	36 mm
B	Overall width	120 mm
D	Outside diameter	100 mm
C	Outer ring width	43 mm
G	Thread stud	M36 x 1.5
G₁	Thread length	38 mm
F_r	Maximum dynamic radial load	130 kN
F_0r	Maximum static radial load	167 kN

NUKR 120

d	Stud diameter	42 mm
B	Overall width	140 mm
D	Outside diameter	120 mm
C	Outer ring width	50 mm
G	Thread stud	M42 x 1.5
G₁	Thread length	44 mm
F_r	Maximum dynamic radial load	164 kN
F_0r	Maximum static radial load	266 kN

NUKR 140

d	Stud diameter	48 mm
B	Overall width	160 mm
D	Outside diameter	140 mm
C	Outer ring width	57 mm
G	Thread stud	M48 x 1.5
G₁	Thread length	52 mm
F_r	Maximum dynamic radial load	200 kN
F_0r	Maximum static radial load	294 kN

NUKR 150

d	Stud diameter	52 mm
B	Overall width	170 mm
D	Outside diameter	150 mm
C	Outer ring width	60 mm
G	Thread stud	M52 x 1.5
G₁	Thread length	52 mm
F_r	Maximum dynamic radial load	220 kN
F_0r	Maximum static radial load	380 kN

NUKR 160

d	Stud diameter	56 mm
B	Overall width	180 mm
D	Outside diameter	160 mm
C	Outer ring width	63 mm
G	Thread stud	M56 x 2
G₁	Thread length	58 mm
F_r	Maximum dynamic radial load	240 kN
F_0r	Maximum static radial load	400 kN

NUKR 170

d	Stud diameter	60 mm
B	Overall width	190 mm
D	Outside diameter	170 mm
C	Outer ring width	66 mm
G	Thread stud	M60x2
G₁	Thread length	58 mm
F_r	Maximum dynamic radial load	260 kN
F_0r	Maximum static radial load	475 kN

NUKR 180

d	Stud diameter	64 mm
B	Overall width	200 mm
D	Outside diameter	180 mm
C	Outer ring width	72 mm
G	Thread stud	M64 x 2
G₁	Thread length	65 mm
F_r	Maximum dynamic radial load	279 kN
F_0r	Maximum static radial load	555 kN

NUKR 35 X

d	Stud diameter	16 mm
B	Overall width	52 mm
D	Outside diameter	35 mm
C	Outer ring width	18 mm
G	Thread stud	M16 x 1.5
G₁	Thread length	17 mm
F_r	Maximum dynamic radial load	8.6 kN
F_0r	Maximum static radial load	16.8 kN

NUKR 40 X

d	Stud diameter	18 mm
B	Overall width	58 mm
D	Outside diameter	40 mm
C	Outer ring width	20 mm
G	Thread stud	M18 x 1.5
G₁	Thread length	19 mm
F_r	Maximum dynamic radial load	13.1 kN
F_0r	Maximum static radial load	22.6 kN

NUKR 47 X

d	Stud diameter	20 mm
B	Overall width	66 mm
D	Outside diameter	47 mm
C	Outer ring width	24 mm
G	Thread stud	M20 x 1.5
G₁	Thread length	21 mm
F_r	Maximum dynamic radial load	16.4 kN
F_0r	Maximum static radial load	35 kN

NUKR 52 X

d	Stud diameter	20 mm
B	Overall width	66 mm
D	Outside diameter	52 mm
C	Outer ring width	24 mm
G	Thread stud	M20 x 1.5
G₁	Thread length	21 mm
F_r	Maximum dynamic radial load	17.3 kN
F_0r	Maximum static radial load	37.5 kN

NUKR 62 X

d	Stud diameter	24 mm
B	Overall width	80 mm
D	Outside diameter	62 mm
C	Outer ring width	29 mm
G	Thread stud	M24 x 1.5
G₁	Thread length	25 mm
F_r	Maximum dynamic radial load	23.5 kN
F_0r	Maximum static radial load	50 kN

NUKR 72 X

d	Stud diameter	24 mm
B	Overall width	80 mm
D	Outside diameter	72 mm
C	Outer ring width	29 mm
G	Thread stud	M24 x 1.5
G₁	Thread length	25 mm
F_r	Maximum dynamic radial load	32 kN
F_0r	Maximum static radial load	50 kN

NUKR 80 X

d	Stud diameter	30 mm
B	Overall width	100 mm
D	Outside diameter	80 mm
C	Outer ring width	35 mm
G	Thread stud	M30 x 1.5
G₁	Thread length	32 mm
F_r	Maximum dynamic radial load	47.5 kN
F_0r	Maximum static radial load	98 kN

NUKR 90 X

d	Stud diameter	30 mm
B	Overall width	100 mm
D	Outside diameter	90 mm
C	Outer ring width	35 mm
G	Thread stud	M30 x 1.5
G₁	Thread length	32 mm
F_r	Maximum dynamic radial load	77 kN
F_0r	Maximum static radial load	117 kN

NUKRE 35

d	Stud diameter	16 mm
B	Overall width	52 mm
D	Outside diameter	35 mm
C	Outer ring width	18 mm
G	Thread stud	M16 x 1.5
G₁	Thread length	17 mm
F_r	Maximum dynamic radial load	8.6 kN
F_0r	Maximum static radial load	16.8 kN

NUKRE 40

d	Stud diameter	18 mm
B	Overall width	58 mm
D	Outside diameter	40 mm
C	Outer ring width	20 mm
G	Thread stud	M18 x 1.5
G₁	Thread length	19 mm
F_r	Maximum dynamic radial load	13.1 kN
F_0r	Maximum static radial load	22.6 kN

NUKRE 47

d	Stud diameter	20 mm
B	Overall width	66 mm
D	Outside diameter	47 mm
C	Outer ring width	24 mm
G	Thread stud	M20 x 1.5
G₁	Thread length	21 mm
F_r	Maximum dynamic radial load	16.4 kN
F_0r	Maximum static radial load	35 kN

NUKRE 52

d	Stud diameter	20 mm
B	Overall width	66 mm
D	Outside diameter	52 mm
C	Outer ring width	24 mm
G	Thread stud	M20 x 1.5
G₁	Thread length	21 mm
F_r	Maximum dynamic radial load	17.3 kN
F_0r	Maximum static radial load	37.5 kN

NUKRE 62

d	Stud diameter	24 mm
B	Overall width	80 mm
D	Outside diameter	62 mm
C	Outer ring width	29 mm
G	Thread stud	M24 x 1.5
G₁	Thread length	25 mm
F_r	Maximum dynamic radial load	23.5 kN
F_0r	Maximum static radial load	50 kN

NUKRE 72

d	Stud diameter	24 mm
B	Overall width	80 mm
D	Outside diameter	72 mm
C	Outer ring width	29 mm
G	Thread stud	M24 x 1.5
G₁	Thread length	25 mm
F_r	Maximum dynamic radial load	32 kN
F_0r	Maximum static radial load	50 kN

Designations

NUKR	E	35	X	SS	RR
1	2	3	4	5	6
1. Cam followers series: NUKR
2. Stud adjustable: Centric – remove prefix “E”; Centric stud with eccentric collar – add prefix “E”
3. Roller size: this data is outside dimeter
4. Profile outer ring: Crowned-blank; Cylindrica l- suffix “X”
5. Material: High Carbon chrome steel – blank; Stainless steel-suffix “SS”; Casehardened steel-suffix “CS”
6. Coating: Special corrosion resistance coating – add suffix “RR”; Oxide black surface finish – add suffix “B”

Features and Benefits

Features of NUKR series cam followers

are based on double row full complement cylindrical roller bearings without an integral flange between the two roller sets
have the outer ring axially guided by the stud head and pressed-on flange ring via the roller sets
have a sheet metal angle ring pressed into the outer ring shoulder on both sides, forming an effective labyrinth seal
have a hexagonal recess at each end of the stud, enabling the cam follower to be held in place by a hexagonal key (Allen wrench) during mounting
have a relubrication hole for a press-in grease fitting or an adapter from a centralized lubrication system in the centre of each hexagonal recess (Accessories)
have a relubrication hole and an annular groove in the stud seat
accommodate relatively heavy axial loads that can occur because of skew or tilting

Benefits of NUKR series cam followers

High radial load carrying capacity
The thick-walled outer ring enables high radial loads, while reducing distortion and bending stresses.
Accommodate axial loads due to skew or tilting
The integral flange (stud head) and the pressed-on flange ring enable cam followers to accommodate axial loads that can occur because of skew or tilting.
Long service life
The crowned outer ring running surface is beneficial for applications where outer ring tilting relative to the track may occur or where edge stresses need to be minimized.
Easy to mount
The threaded solid stud (pin) of cam followers can be quickly and easily attached to appropriate machine components by means of a hexagonal nut.
Sealed for increased reliability, with relubrication feature

Temperature limits

The permissible operating temperature for cam followers can be limited by:

the stud, the outer ring and rollers
the cage
the seals
the lubricant
the other components

When temperatures outside the permissible range, please contact us.

Stud, outer ring and rollers

Cam followers are heat stabilized up to at least:

140 °C (280 °F) for designs based on a cylindrical roller bearing
120 °C (250 °F) for designs based on a needle roller bearing

Cages

The permissible operating temperature for cages depends on the seal material:

steel cages can be used at the same operating temperature as the stud, the outer ring and rollers
120 °C (248 °F) for polyamide 66 cages

Seals

The permissible operating temperature for seals depends on the seal material:

NBR: –40 to +100 °C (–40 to +210 °F)
Temperatures up to 120 °C (250 °F) can be tolerated for brief periods
PP: –20 to +80 °C (–5 to +185 °F)
PTFE: -196 to +260 °C (–320 to +500°F) * continuous working temperature had better below +200 °C ( +392°F)
Sheet metal angle rings can be used at the same operating temperatures as the stud, the outer rings and rollers

Lubricants

Lithium Soap Grease NLGI #2

SINOPEC Hangu 2# : –20 to +120 °C (–4 to +248 °F)
Shell Alvania EP2: –20 to +120 °C (–4 to +248 °F)

Other components

Eccentric collars and pressed-on flange rings can be used at the same operating temperature as the stud, the outer ring and rollers.

Tolerance and Clearance

Bearing tolerances and clearances

Tolerances: Normal, Other, Cam followers
Radial Internal clearance: Cam followers

Download

Cam Followers

Series Item	Miniature Type Cam Followers CFS	Standard Type Cam Followers (1)		Inch Series Cam Followers
		Crowned outer ring	Cylindrical outer ring	Crowned outer ring	Cylindrical outer ring
Outside dia. of outer ring D	See Table 2.1	0 －50	See Table 2.2	0 －50	See Table 2.3
Stud diameter d	h6	h7		＋ 25 0
Width of outer ring C	0 －120	0 －120		0 －130

Δ Dmp Deviation of mean outside diameter in a single plane								Kea Radial runout of outer ring of assembled bearing (Maximum)
Class 0		Class 6		Class 5		Class 4		Class 0	Class 6	Class 5	Class 4
High	Low	High	Low	High	Low	High	Low
0	－8	0	－7	0	－5	0	－4	15	8	5	4

Identiﬁcation number				Radial internal clearance
Miniature Type Cam Followers CFS	Standard Type Cam Followers (1)	Cylindrical Roller Cam Followers	Inch Series Cam Followers	Min.	Max.
CFS1.4 to CFS5	KR 10 to KR 13	－	CF1/2N,1/2,9/16; CFH1/2,9/16	3	17
CFS6	KR 16	－	CF5/8N, 5/8, 11/16; CFH5/8,11/16	5	20
－	KR 19 to KR 32	－	CF3/4 to 1-3/8; CFH3/4 to 1-3/8	5	25
－	KR 35 to KR 52	－	CF1/2 to 2-1/4; CFH1/2 to 2-1/4	10	30
－	KR 62 to KR 90	－	CF3; CFH2-1/2 to 3-1/2	10	40
－	－	－	CFH4	15	50
－	－	NUKR35 to NUKR62	PWKR35 to PWKR62	20	45
－	－	NUKR72 to NUKR90	PWKR72 to PWKR90	25	50

Model of bearing	Tolerance class of mounting hole for stud
Miniature Type Cam Followers CFS	H6
Standard Type Cam Followers (1)	H7
Inch Series Cam Followers	F7

Classiﬁcation of diameter mm		F7		H6		H7
Over	Incl.	High	Low	High	Low	High	Low
－	3	＋16	＋ 6	＋ 6	0	＋10	0
3	6	＋22	＋10	＋ 8	0	＋12	0
6	10	＋28	＋13	＋ 9	0	＋15	0
10	18	＋34	＋16	＋11	0	＋18	0
18	30	＋41	＋20	＋13	0	＋21	0
30 40	40 50	＋50	＋25	＋16	0	＋25	0

PRODUCT FILTERS AND TABLE

Features of NUKR series cam followers

Benefits of NUKR series cam followers

Stud, outer ring and rollers

Cages

Seals

Lubricants

Other components

Bearing tolerances and clearances

Fit:

C&H BEARING WEBSITE

Inner ring
d		tΔdmp		tVdsp¹⁾			tVdmp¹⁾	tΔBs			tVBs	tKia
				Diameter series				All	Normal	Modified³⁾
>	≤	U	L	7, 8, 9²⁾	0, 1	2, 3, 4		U	L	L
mm		μm		μm			μm	μm			μm	μm

–	2.5	0	–8	10	8	6	6	0	–40	–	12	10
2.5	10	0	–8	10	8	6	6	0	–120	–250	15	10
10	18	0	–8	10	8	6	6	0	–120	–250	20	10

18	30	0	–10	13	10	8	8	0	–120	–250	20	13
30	50	0	–12	15	12	9	9	0	–120	–250	20	15
50	80	0	–15	19	19	11	11	0	–150	–380	25	20

80	120	0	–20	25	25	15	15	0	–200	–380	25	25
120	180	0	–25	31	31	19	19	0	–250	–500	30	30
180	250	0	–30	38	38	23	23	0	–300	–500	30	40

250	315	0	–35	44	44	26	26	0	–350	–500	35	50
315	400	0	–40	50	50	30	30	0	–400	–630	40	60
400	500	0	–45	56	56	34	34	0	–450	–	50	65

500	630	0	–50	63	63	38	38	0	–500	–	60	70
630	800	0	–75	–	–	–	–	0	–750	–	70	80
800	1 000	0	–100	–	–	–	–	0	–1 000	–	80	90

1 000	1 250	0	–125	–	–	–	–	0	–1 250	–	100	100
1 250	1 600	0	–160	–	–	–	–	0	–1 600	–	120	120
1 600	2 000	0	–200	–	–	–	–	0	–2 000	–	140	140

Outer ring

D		tΔDmp		tVDsp⁴⁾				tVDmp⁴⁾	tΔCs, tVCs			tKea
				Open bearings			Capped bearings⁵⁾
				Diameter series			Capped bearings⁵⁾
>	≤	U	L	7, 8, 9²⁾	0, 1	2, 3, 4	2, 3, 4
mm		μm		μm				μm	μm			μm

2.5	18	0	–8	10	8	6	10	6	Identical to tΔBs and tVBs of an inner ring of the same bearing as the outer ring			15
18	30	0	–9	12	9	7	12	7				15
30	50	0	–11	14	11	8	16	8				20

50	80	0	–13	16	13	10	20	10				25
80	120	0	–15	19	19	11	26	11				35
120	150	0	–18	23	23	14	30	14				40

150	180	0	–25	31	31	19	38	19				45
180	250	0	–30	38	38	23	–	23				50
250	315	0	–35	44	44	26	–	26				60

315	400	0	–40	50	50	30	–	30				70
400	500	0	–45	56	56	34	–	34				80
500	630	0	–50	63	63	38	–	38				100

630	800	0	–75	94	94	55	–	55				120
800	1 000	0	–100	125	125	75	–	75				140
1 000	1 250	0	–125	–	–	–	–	–				160

1 250	1 600	0	–160	–	–	–	–	–				190
1 600	2 000	0	–200	–	–	–	–	–				220
2 000	2 500	0	–250	–	–	–	–	–				250

1) Except tapered bore. 2) Diameter series 7 and 8 not covered by ISO 492. 3) Applies to inner rings and outer rings of bearings of matched bearing sets consisting of two or more bearings. Does not apply to universally matchable angular contact ball bearings. 4) Applies to bearings prior to mounting and after removal of internal or external snap ring. 5) Capped bearings are sealed or shielded bearings.

Nominal		h7Ⓔ		h9Ⓔ		h10Ⓔ		h12Ⓔ		F6Ⓔ
dimension		Deviations		Deviations		Deviations		Deviations		Deviations
>	≤	U	L	U	L	U	L	U	L	U	L
mm		μm		μm		μm		μm		μm

3	6	0	–12	–	–	–	–	–	–	–	–
6	10	0	–15	0	–36	–	–	–	–	22	13
10	18	0	–18	0	–43	–	–	0	–180	27	16

18	30	0	–21	0	–52	–	–	0	–210	33	20
30	50	–	–	0	–62	–	–	0	–250	41	25
50	80	–	–	–	–	–	–	–	–	49	30

120	180	–	–	–	–	0	–160	–	–	–	–
180	250	–	–	–	–	0	–185	–	–	–	–
250	315	–	–	–	–	0	–210	–	–	–	–

D Nominal outside diameter of outer ring mm		Δ Dmp Deviation of mean outside diameter in a single plane		VDsp Variation of outside diameter in a single plane (Maximum)	VDmp Variation of mean outside diameter (Maximum)	Kea Radial runout of outer ring of assembled bearing (Maximum)
Over	Incl.	High	Low		VDmp Variation of mean outside diameter (Maximum)
6	18	0	－ 8	10	6	15
18	30	0	－ 9	12	7	15
30	50	0	－11	14	8	20
50	80	0	－13	16	10	25
80	120	0	－15	19	11	35

PRODUCT FILTERS AND TABLE

Features of NUKR series cam followers

Benefits of NUKR series cam followers

Stud, outer ring and rollers

Cages

Seals

Lubricants

Other components

Bearing tolerances and clearances

Fit:

Accuracy

FILTERS

Roller diameter (mm)

Stud diameter (mm)

Overall width (mm)

Outer ring width (mm)

Outer ring profile

Roller guide

Stud type

Sealing type

Designation

Interchange Code

C&H BEARING WEBSITE